The Accucam QD Integral Ring Base is available in two different
heights to accommodate proper cheek welds. One is specifically for
the AR15/M16 Weapon System (GGG-1198) as shown here, the other one
is for Bolt Guns (GGG-1199)
The integral rings on the Accucam QD Integral Ring Base for the
AR are spaced at 4.400 inches center to center. The height from the
top of the dovetail to the centerline of the ring is 1.400
inches.
The integral rings on the Accucam QD Integral Ring Base for Bolt
Guns are spaced at 4.400 inches center to center. The height from
the top of the dovetail to the centerline of the ring is 1.060
inches.
Both bases are designed and manufactured to meet the rigors of
combat and professional use. Both are manufactured from solid
billet 6061 T6 aluminum alloy and have a Type III hard coat
anodized matte black mil-spec finish. All edges have been dehorned
to protect the operator. The 30mm rings are an integral part of the
base, not machined seperately and stuck on the base. The ring caps
are held solidly in place with four socket head cap screws.
The Accucam QD Locking Lever System provides you with a solid
method to quickly install or remove the mounting base from the
weapon system. The base can be quickly installed on a dovetail rail
in seconds by rotating the Accucam Cam Lever to the locked
position. It can then be quickly removed by rotating the Accucam
Cam Lever to the unlocked position. It is fully adjustable to fit
Weaver and MIL-STD-1913 dovetails. The unique design allows you to
adjust the tension to accommodate out of spec or worn dovetails. In
tests, the Accucam Locking Lever System has shown to be repeatable
to 1/2 MOA. The unique finger loop design is easily operated, even
with a gloved hand and the rounded design is ergonomic and
virtually snag proof. The Accucam mechanism is manufactured from
solid billet 4140 steel and manganese phosphated matte black per
mil-spec.
There are currently no reviews of this
product.
Submit a Review