The Accucam QD Integral Ring Base is available in two different
heights to accommodate proper cheek welds. One is specifically for
bolt guns as shown here,and the other is the GGG-1198 for the
AR-15/M-16 weapon system.
The integral rings on the Accucam QD Integral Ring Base for a
bolt gun are spaced at 4.400 inches center to center. The height
from the top of the dovetail to the centerline of the ring is 1.060
inches.
The integral rings on the are spaced at 4.400 inches center to
center. The height from the top of the dovetail to the centerline
of the ring is 1.400 inches.
Both bases are designed and manufactured to meet the rigors of
combat and professional use. Both are manufactured from solid
billet 6061 T6 aluminum alloy and have a Type III hard coat
anodized matte black mil-spec finish. All edges have been dehorned
to protect the operator. The 30mm rings are an integral part of the
base, not machined seperately and stuck on the base. The ring caps
are held solidly in place with four socket head cap screws.
The Accucam QD Locking Lever System provides you with a solid
method to quickly install or remove the mounting base from the
weapon system. The base can be quickly installed on a dovetail rail
in seconds by rotating the Accucam Cam Lever to the locked
position. It can then be quickly removed by rotating the Accucam
Cam Lever to the unlocked position. The Accucam System is fully
adjustable to fit Weaver and MIL-STD-1913 dovetails. The unique
design allows you to adjust the tension to accommodate out-of-spec
or worn dovetails.
In manufacturer tests, the Accucam Locking Lever System has
shown to be repeatable to 1/2 MOA. The unique finger loop design is
easily operated, even with a gloved hand and the rounded design is
ergonomic and virtually snag proof. The Accucam mechanism is
manufactured from solid billet 4140 steel and manganese phosphated
matte black per mil-spec.
There are currently no reviews of this
product.
Submit a Review